Page 1 of 1
anti roll bar
Posted: 17 Apr 2007, 15:05
by ginge
the stay off the anti roll bar sheared the nut is there a way too get the bush etc out or is it best to remove the whole anti roll bar any advice welcome its on a 1980 a/c
Posted: 17 Apr 2007, 17:17
by toomanytoys
If you mean the bottom of the link arm a good tug or leaver will get it out of the rubbers in the arm.. but you will have to take the ARB off in any case to get a new link on with new bushes.. dont be tempted to refit all the old rubber.. get new, the difference is amazing and you road holding will be restored..
Posted: 17 Apr 2007, 17:40
by ginge
right will do that new rubber all round thanks
Posted: 18 Apr 2007, 18:45
by The_blue
http://archive.club8090.co.uk/viewtopic ... highlight=
Asked about fitting a few weeks back
warm the rubbers!! helps no end!
Posted: 18 Apr 2007, 19:18
by ginge
thanks for the info