Page 1 of 1
Engines out!
Posted: 12 Apr 2007, 06:49
by lidders
Due to some extra stubborn exhaust studs I have had to remove the engine.
Whilst it is out, can any one suggest any other repairs, fixes or maintainence I should be looking at whilst it is on the bench?
Thanks in advance.
LIDDERS
Posted: 12 Apr 2007, 07:51
by T'Onion
which engine is it ?
Posted: 12 Apr 2007, 11:31
by Trundler
If it's a flat 4 a reinforcement to the alternator bracket is a good idea. A flat extension welded on the back of the bracket and screwed down to the block makes the whole arrangement a lot strurdier.
Posted: 12 Apr 2007, 18:58
by lidders
sorry 1.9 DG in a 1987 high top!
Lidders
Posted: 12 Apr 2007, 21:08
by T'Onion
list is endless , water pump is cheap enough to replace , or you could do all the gaskets and seals
oh and the engine mounts if they look old and tired
Posted: 13 Apr 2007, 08:42
by toomanytoys
As suggested a new waterpump wouldnt hurt if you dont know how old it is.. and check all thehoses and clips around the cooling system..
I wouldnt touch the heads unless there is a coolent leak.. you could find yourself in deeper water if you do..
Rebuild the carb is also a good idea too.. GSF do the gasket kits.. its quite easy as long as you dont "adjust anything and put the jets back in the right place..