Club 80-90 Forums

Hello, can someone please help me identifying this carburettor, its from my 84’ 1.9 DG water cooled van.

I have doubts because the markings on it say pierburg 2E, i was wondering, is there a simple 2E?

Is it not 2E3 or 2E2? How can I determine that, thanks.

Here is a video and a photo of the carb im talking about.

https://imgur.com/gallery/carburettor-5QsJcUZ

Can't see anything? The video or photos are blank... to me that is.

2E then nearby a serial number just above, on the upper body off your carb, should start 025, identifies the correct model. Then letter/s at end.

Hope this helps

maxstu wrote:Can't see anything? The video or photos are blank... to me that is.

2E then nearby a serial number just above, on the upper body off your carb, should start 025, identifies the correct model. Then letter/s at end.

Hope this helps

This is the serial number photo



Sent from my iPhone using Tapatalk

That's the one. T25/T3 automatic carb.

maxstu wrote:That's the one. T25/T3 automatic carb.

I know but i was wondering whether its a 2E a 2E2 or a 2E3 because i need to buy a rebuild kit and brickwerks only has one for 2E3 carb, do you think that will fit?


Sent from my iPhone using Tapatalk

It will fit. But you need to work out which accelerator pump you need. 19mm comes with kit. 13mm is extra.
1984 van normally have 13mm, if original, l think?

maxstu wrote:It will fit. But you need to work out which accelerator pump you need. 19mm comes with kit. 13mm is extra.
1984 van normally have 13mm, if original, l think?

Usually yes, i think this one has 19 mm, thanks for your response


Sent from my iPhone using Tapatalk