Page 1 of 1
aftermarket rev counter
Posted: 11 Feb 2026, 12:18
by Vanmad72
looking for some help on how to fit a after market rev counter to a late van.Im not the best at doing electrics so ant help would be good thanks
Re: aftermarket rev counter
Posted: 12 Feb 2026, 06:46
by Rik
What kind of van and engine do you have?
Re: aftermarket rev counter
Posted: 12 Feb 2026, 10:47
by R0B
A 1.9 DG methinks.
Re: aftermarket rev counter
Posted: 12 Feb 2026, 16:00
by Vanmad72
hi yes its a 1.9 dg engine
Re: aftermarket rev counter
Posted: 12 Feb 2026, 17:10
by Aidan
The green wire going to pin 9 on the 14 pin edge connector that supplies the dash is the rev signal from the coil on a petrol van; you'll need to T off it to make a connection to your rev counter and also supply live and neutral power feed to it. Don't disconnect pin 9 from the edge connector or your buzzer of doom (Dynamic oil pressure warning system) won't work, it needs to know if revs are above 2,000rpm