Page 1 of 1
1.9DG aengine metal coolant olpipe replacement.
Posted: 16 Jan 2026, 21:37
by keynsham1
I am replacing a rusted through pipe on my engine. Part 24 in the picture. I have one from JK but the flange that bolts on to the water pump is so out of position that it is never going to fit. Are there any better ones available?
Sent from my SM-F946B using Tapatalk
Re: 1.9DG aengine metal coolant olpipe replacement.
Posted: 16 Jan 2026, 21:38
by keynsham1
Another view!
Sent from my SM-F946B using Tapatalk
Re: 1.9DG aengine metal coolant olpipe replacement.
Posted: 16 Jan 2026, 21:46
by davidoft1
For the metal pipe to the water pump before fitting the hose
Re: 1.9DG aengine metal coolant olpipe replacement.
Posted: 17 Jan 2026, 01:45
by Stesaw
davidoft1 wrote: ↑16 Jan 2026, 21:46
For the metal pipe to the water pump before fitting the hose
Fit
(no I wasn't making a pass)
Re: 1.9DG aengine metal coolant olpipe replacement.
Posted: 17 Jan 2026, 09:19
by keynsham1
The flange is so far out that if I try that, the other end would be about 4 inches low. The flange is not just a bit out of line, it's just in completely the wrong position!
Re: 1.9DG aengine metal coolant olpipe replacement.
Posted: 17 Jan 2026, 09:26
by Aidan
If you have had it less than 6 months simply return it as not fit for purpose, manufacturing error, there should be no argument, if they push back mention this thread and likelihood of further negative feedback - though peeps generally are less than complimentary about JK on here historically, but there's plenty of other places you can post so remind them of that.
If less than 12 months same should apply really but they might try and pull the need to prove it was faulty originally, but really no argument, it's not been fitted as it is nffp
