Page 1 of 1

What will the neighbours say...

Posted: 01 Apr 2007, 20:59
by HarryMann
Image

Posted: 01 Apr 2007, 21:06
by airhead
8)

Posted: 01 Apr 2007, 21:10
by andysimpson
You made it then :)

Did the AA park it there or you :lol:
What was the noise?
Was it any faster?

Posted: 01 Apr 2007, 22:19
by HarryMann
No, this pic was before we left - Andy ot'road took it, doesn't miss much!

No prob really tonight, those pesky driveshaft bolts again... same layby we stopped at last April with my Doka (after spewing out another pint of oil)... always 20 miles from home as the sun is setting... nice full moon and lovely big red sun in the mirror tonight though 8)

Always always, use new spline bolts, proper VW lockwashers and same heads throughout on vehicle - seems theres a right hodgepodge of bolts on the DoDoka driveshafts, many rounded out - pooh at night when they come loose. 1/2 hour and a few choice words and off we went...

Posted: 02 Apr 2007, 19:06
by crazydiamond
Clive I see you've still got that cardboard cut out of a yellow Syncro?? Just a mirage is'nt it? Well did you drive back a little faster than coming to CF

Posted: 02 Apr 2007, 19:19
by HarryMann
Slightly faster thanks... Andy had given it a bit more throttle, and a bit more advance but I've taken a look at a few things today and...

Ughhh!

Posted: 02 Apr 2007, 19:22
by andysimpson
HarryMann wrote:Slightly faster thanks... Andy had given it a bit more throttle, and a bit more advance but I've taken a look at a few things today and...

Ughhh!

Did you set everything up as spec for a JX/PB/EV/2E engine it won't run right if you don't. :lol:

Posted: 02 Apr 2007, 19:53
by Simon Baxter
:lol:

Posted: 02 Apr 2007, 21:27
by HarryMann
Sundown saw me with a 2lb club annoying the neighbores again... I call them neighbores as they neigh a lot !

Having managed to remove the AFM unit (already highly modified) from its resting place (where the mechanic who did the head-gasket last decided to leave it- as it wouldn't go back where someone else (nameless) decided it perhaps should )

I then found that he (the mechanic) was right - hence one or two 'areas' of sheet metal, namely highly structural welded flanges designed to cut the backs of your hands to ribbons and prevent PB/JX/2E/EU's from fitting properly - have now been 'adjusted'

That's why I'm rambling, I have that JX/PB/EU/2E tuned to perfection now.. one last resounding blow that shook the terrace, missed the flange and ... :shock:

that did it, perfict now - will never go again, bliss :P

Posted: 02 Apr 2007, 23:25
by HarryMann
Only joking, more PB/2E/JX/EU tuning taking place tomorrow...

Re: What will the neighbours say...

Posted: 03 Apr 2007, 19:21
by KarlT
HarryMann wrote:Image


Bloody Gypos!!!!............ :D

Posted: 03 Apr 2007, 23:08
by HarryMann
Yes, I know, they keep dumping syncros up my street, ah well! Better make good use of them :wink: