Page 1 of 1
Does anyone know the operation of the DOPS module.
Posted: 24 Jun 2025, 13:14
by TwinTurbo
Looking to re-create the DOPS.
Does anyone have a table of RPM vs Switch Status = Action?
Cheers
Rob
Re: Does anyone know the operation of the DOPS module.
Posted: 24 Jun 2025, 17:59
by Robsey
The trigger rpm is 2000 rpm
The pressure switch is one of a range between 0.9bar up to 1.8bar
The idea being that if the rpm is 2000 rpm or above, and the oil pressure drops below 0.9 bar (up to 1.8 bar) the oil light should flash and the buzzer will sound.