Club 80-90 Forums

Hello. I am new to this forum. I bought my Syncro a couple of weeks ago.
It is a 1.6TD Syncro and I am having a 1.9TDI fitted into it. I have been told I need to uprate the clutch. I have also been told that there are off the shelf parts from VW and Audi that can be mixed to do the job, and they bolt straight on to the TD flywheel. Does anyone know about this and can anybody help me with part numbers etc.

I have an Audi 80 tdi in mine running a standard td clutch and have never had any problems

Hi there, welcome to the scene !

There've been quite a few posts on this sort of subject, try using the forum 'search'. This thread for example.

What's your plan regarding the gearing ? The TDi needs to run at much lower engine speeds than any original Syncro motor, which usually means a gearbox rebuild or something equally drastic.

PS. What are you doing with your JX ? Is it any good ?
PPS. Where TF are you ? You're profile's not completed.

Thanks for the replies. I've updated my profile.
That thread was useful, I'll have to get used to finding the info. I am going to put 15" wheels and tyres on it and see how it goes. The engine that's come out is knackered.

at least 2 companies with online shops sell a t3/tdi input shaft for the gearbox,for about £80.once thats fitted its tdi clutches foreverrrrrrrrrrr!

moonshine wrote:at least 2 companies with online shops sell a t3/tdi input shaft for the gearbox,for about £80.once thats fitted its tdi clutches foreverrrrrrrrrrr!

Its a waste of money, there no stronger than the waterboxer route.