Page 1 of 1

How to replace rubber boots behind rear light cluster

Posted: 09 Oct 2024, 17:54
by bessiebelle
I'm trying to replace the rubber boots behind the rear light cluster

I can't figure out how to detach the connector from the light so I can slip the old boot off and new boot on

Is there a clip or something? My brute force isn't working

Have checked Haynes, nothing...

The boots are these ones https://brickwerks.co.uk/product/protec ... ht-wiring/

Photo
Image



Thanks !

Re: How to replace rubber boots behind rear light cluster

Posted: 09 Oct 2024, 18:59
by mioba
remove battery negative.
Pull white connector out pf light. No clips anywhere.

remove all wires. The crimps are with tangs so a small screwdriver down the back.
Spray dilute detergent on the cable/rubber grommet.
remove rubber grommet.

Reverse.

Re: How to replace rubber boots behind rear light cluster

Posted: 11 Oct 2024, 11:21
by bessiebelle
Thank you, I'll just tug a bit harder then