Club 80-90 Forums

Hi All,
looking to tap into people’s knowledge. The sliding door on my T25 seems to have a smaller window than most, although, I like it. There will come a time when I need to replace seals etc. so was looking to see if anybody could give me more info. Here it is:

any help, much appreciated

Seals direct is gonna be your best bet.
Probably a standard claytonrite type

Stesaw wrote: ↑15 Sep 2024, 14:30 Seals direct is gonna be your best bet.
Probably a standard claytonrite type

Yeah, probably best that I just measure it up and see what they have. Worst case, I could splice something similar.
 

Probably the 1mm x 3mm stuff. When you take the old one out just measure the two gaps and the web for the closest one.

Stesaw wrote: ↑15 Sep 2024, 20:51 Probably the 1mm x 3mm stuff. When you take the old one out just measure the two gaps and the web for the closest one.

Will do.
I haven’t seen this type of door before tbh, all others seem to have different windows?
 

Same doors as the rest just a different window cut into it

Stesaw wrote: ↑16 Sep 2024, 16:27 Same doors as the rest just a different window cut into it

Yeah, just seems like an unusual window choice, which I haven’t seen before.