Sliding door - middle runner - knocking during shutting
Posted: 18 Jul 2024, 19:39
Just re-assembled sliding door after slapping a bit of paint on the middle runner channel.
Ive reassembled the roller assy. to the door, the door lines up and shuts seemingly perfectly (lucky first try) - but there is a 'knock' as the pair of bearing rollers go around the corner (this happens just before the rear of the door swings in to latch). They are knocking against the metalwork. Am I missing a damper of some kind
I've found a remnant of a rubber like substance in the slot - I'd sooner have the proper part rather than homemaking something from a bit of hard rubber!
Browsed the sliding door parts on BW but couldnt see what I thought would be a suitable part.
ta
Ive reassembled the roller assy. to the door, the door lines up and shuts seemingly perfectly (lucky first try) - but there is a 'knock' as the pair of bearing rollers go around the corner (this happens just before the rear of the door swings in to latch). They are knocking against the metalwork. Am I missing a damper of some kind
I've found a remnant of a rubber like substance in the slot - I'd sooner have the proper part rather than homemaking something from a bit of hard rubber!
Browsed the sliding door parts on BW but couldnt see what I thought would be a suitable part.
ta