Club 80-90 Forums

Hi all 1988 1.6jxtd LHD
I have a brick werks 10x645 water pump belt fitted to my van I've taken all the spacers out of the pulley but it still seems a bit loose is there a smaller belt or am I missing something
Ps belt is as new .
Many thanks in advance Danny.

My guess is that you have some mismatched pulley set, as the 10x643 should be a good fit for the crank to water pump on a two belt system

Do you still have the old belt?

Thanks for the reply.
No.

I had the same issues on mine and oldie but goodie said to just use some string to measure it and mine came out a different size than any manuals. Worked fine for a few years now.

Good idea I would like to replace the 3 bolts in the pulley at the same time as there a bit rounded any idea what size they are .
Cheers for the reply.

I had to replace the bolts as well hah,

Quick Google shows part number n0102416

Which would be number six on pic

That's if those are the ones you want to replace

Cheers!!