Page 1 of 1
MY engine timing
Posted: 30 Apr 2024, 16:29
by Buggy83
Hi have a 2.1 mv engine that has a triple pulley fitted.I was wondering which Mark on which pulley do I use to time the engine up.And is setting the timing the same as a DG engine.I have fitted a carb to my engine so it's not running the fuel injection system thanks.
Re: MV engine timing
Posted: 30 Apr 2024, 16:55
by Buggy83
Buggy83 wrote: ↑30 Apr 2024, 16:29
Hi have a 2.1 mv engine that has a triple pulley fitted.I was wondering which Mark on which pulley do I use to time the engine up.And is setting the timing the same as a DG engine.I have fitted a carb to my engine so it's not running the fuel injection system thanks.
Re: MY engine timing
Posted: 30 Apr 2024, 16:56
by Stesaw
The V shaped one
Re: MY engine timing
Posted: 01 May 2024, 12:54
by Buggy83
The front and the 2nd both have a v shape in them
Re: MY engine timing
Posted: 01 May 2024, 13:02
by Stesaw
TDC will be a larger U shaped notch, the v will be smaller. Take a picture and post it up here and will have a look.
The U shaped notch will on the largest pulley section closest to the block.
Re: MY engine timing
Posted: 02 May 2024, 06:16
by Aidan
Markings do vary, my SA built 1990 DJ does't have the same markings as a German assembled one