Club 80-90 Forums

Running my van up to temperature.
I get a small weep and intermittent bubbling near the oil Pump and mainly near a brown cable I think for a sensor.
It’s a the back of the block on the bottom left side.

Is the bolt a should nip up on there.

I think the previous owner may have done work there.

iMessage or WhatsApp to see the video.

07379835448.

Thank you

Daniel

Most likely the switch (its not a sensor) has failed and is passing oil. Replace immediately or they can suddenly let out a jet of oil when running.

Thank you. I’ll order a replacement today.
Must I go to regular suppliers for t25? It is the grey switch that’s meant to be there right?

silverbullet wrote: ↑22 Aug 2023, 06:47 Most likely the switch (its not a sensor) has failed and is passing oil. Replace immediately or they can suddenly let out a jet of oil when running.

I’ll need a white one 1.6-2.0bar for this spot right?
Are these fitted with o rings?

Could be black, grey or white. Depends on year of engine. You could simply change like for like.
They are prefitted with a sealing washer.
I've found it far easier to remove 3 bolts and put aside water pump pulley for best access.

Have a read....

https://brickwerks.co.uk/blog/vw-t3-oil ... -switches/

Thank you.

I did remove the pump wheel annd replaced my belt whilst I was was at it and we’re god to go.
Engine ran to temp and no leaks.