Page 1 of 1

JP group replacement CE1 fuse box - Anyone used one?

Posted: 04 Sep 2022, 13:20
by cobblers
My fuse box isn't the best, the fuse terminals for my rear blower are pretty scorched and it needs the fuse "fettling" pretty often to keep it going. Luckily it's a LHD van so I can do it while on the move and mostly not crash.

With winter coming up I need to get it fixed properly. Faced with a choice of 30 year old 2nd hand fuse boxes a £50-80 or a brand new one for £115 shipped, I would ordinarily rather just get a new one, I don't have a lot of spare time so the premium is fairly well spent to get the job done right, first time.

However I've had some really poor JP group stuff, so I thought I'd check to see if anyone had any experience with them - good or bad?

Re: JP group replacement CE1 fuse box - Anyone used one?

Posted: 07 Sep 2022, 14:41
by Aidan
got a few used ones here, easy enough to take the cover off to check them out

Re: JP group replacement CE1 fuse box - Anyone used one?

Posted: 07 Sep 2022, 14:44
by cobblers
I tried taking a CE2 fuse box apart some years ago and it wasn't going to come to bits elegantly - the internal frame/contacts seemed to be heat staked, so I presumed these CE1 was roughly the same.

Happy to buy a decent used one, I'll definitely need at least replacement fuse contacts for this one as they're scorched and tarnished - cleaning stuff like this up never really lasts.