Club 80-90 Forums

What is the difference between a DF and DG engine, I thought mine was a DG but after looking at other forums topics along with images it resembles a DF at least from appearances, any pics and advice what is the difference would be welcomed.

It will be at the start of your engine number.
Assuming it is still clearly visible.

Otherwise look at your carburettor.
The DG has a Pierburg 2e3 carb, which looks quite round / circular from above.
The DF has a Solex Pict carb which is quite square to look at from above.

Otherwise look at the white sticker under the dash - it should identify the engine code and transmission code on there.

This all assumes that it is the original from the factory.



Mine say - DF engine and DT gearbox.

Thanks mine is listed as DG and has the Pierburg 2e3 carb as you mentioned, but just seen a post by another member with very similar carb and fitments engine layout images as mine but listed as a DF.

As said -
Look at the front of the engine - below the breather tower, but above the dip-stick.

Here is my project DJ engine.



Look on the flat protrusion for the engine code followed by the engine number.

If its got a DG carb it must have a DG inlet manifold, but it can still have DF heads .

Peer through the number plate hatch and you will have this view

Thanks again will check tomorrow.

Try and get up a slight hill. If you've got a DF similar to mine it will feel like driving through treacle.