Club 80-90 Forums

Hello,

https://syncrosport.com/info/wiring/

This wiring diagram from syncosport, mostly agrees with my June 1989 JX 1.6 Club Joker. However the manual is post August 1989, and some of the wiring diagrams relating to the light switch and hazard switch do not match my van.

Can somebody point me in the right direction for a correct diagram? I have the Bentley manual, but again not sure if only some bits match.

Thanks,

Mark

I think the date on the workshop manuals relates to when it was last updated, not a cut-off date, so I doubt you're going to find anything that's more specific.

It might be worth checking however where your van was first sold as there are some country specific modifications that were made to wiring, etc, to suit local regulations like daylight running lights - it might be that this is your problem.

Thanks, how would I go about finding out the country in which the vehicle was first sold? 

 

If you can find the M-plate in your van, then that usually has the destination country coded in the information stamped on it. Otherwise it's probably a case of getting a copy of the 'birth certificate' for your van.

The M Plate is usually sat on the side wall of the tub under the left-hand seat in the cab.

Looking towards the driver's side through the passenger-side cab door.

I have german language wiring diagrams for all years.

August '89 means from model year '90. 10th digit of chassis nr is L
http://vwt3.com/t3-tech/t3-data/t3-manufacture-dates/