Club 80-90 Forums

Can anybody advise the best place to get a anti roll bar link?

Its the earlier type with the bend in.

Cheers all

If its the one with big crank in it, rather than just a small bend, then GSF do them, as they fit Bay modesls too.

The cranked should be VW Part No. 251 411 051 (early 2WD)

251 051A (Late 2WD Straight)

The stab bar link also requires (num per side):

Top Rubber Mounting (21mm) 251 411 045 (1)

Damping Rings (rubbers either side of lower joint) 251 411 039 (2)

Spacer Sleeve 251 411 047 (1)

Nut M10 Locking (900 876 02) (1)

got plenty of used ones here,and their nothing to do with bay windows,cj.

If its the one with big crank in it, rather than just a small bend, then GSF do them, as they fit Bay modesls too.
The cranked should be VW Part No. 251 411 051 (early 2WD)

Yes, not Bay, duff info, early T25

Cheers guys,
Got one from GSF on Sat afternoon. Lot cheaper than JK too!!