Club 80-90 Forums

My anti-roll bar has looked like this on the near side for some time. I have an MOT (CVRT over here) coming up. Is it a problem and if so is it just a case of loosening off the adjacent bracket and giving it a whack?



Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Lever , whack it back in place , check if the bush is worn

Ciaraneng wrote: ↑03 Oct 2020, 15:26


Sent from my iPhone using Tapatalk

Is that a rub mark at the base of the anti roll link bar where it maybe making contact with something else
 

Thanks David. Managed it with a vice grips and a large shifters to rotate the connecting rod.


Sent from my iPhone using Tapatalk

Hard to tell if the Bush is worn but probably is since it drifted out of place.


Sent from my iPhone using Tapatalk

Other side


Sent from my iPhone using Tapatalk

TONYT25T25 wrote: ↑03 Oct 2020, 18:27

Ciaraneng wrote: ↑03 Oct 2020, 15:26


Sent from my iPhone using Tapatalk

Is that a rub mark at the base of the anti roll link bar where it maybe making contact with something else

Yes, just rubbing against the speedo cable though so not moving anything
 

Know what you mean, the speedo cable does seem to be secured in different areas, mine is cable tied to the spare wheel carrier rods.

TONYT25T25 wrote: ↑03 Oct 2020, 20:20 Know what you mean, the speedo cable does seem to be secured in different areas, mine is cable tied to the spare wheel carrier rods.

Might do that tomorrow