Page 1 of 3
Fitting Powerflex Bushes To PAS Rack
Posted: 07 May 2020, 18:32
by maxstu
So l have the heritage style new steering rack bushes now in my sticky hands (thank you B/werks) l had a preliminary look under camper. Ive changed non PAS before, but this looks far more challenging!
The PAS pipes to rack are all solid pipes. So unlike non PAS its not a simple case of unbolting x4 and pulling rack away from chassis to remove old and insert Powerflex alternatives. I just cant see how the rack will give enough to fit the bushes on the back side of rack. It might even be easier to fit original type instead... since they can be pushed in from the front.
Not sure where to start. But it looks as if removing track end rod bushes from steering knuckle may help? Or the steering rod to coupling?
Any pointers from others' on here please.
Regards
Stuart
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 08 May 2020, 06:36
by slowcoach
Have a look on thesamba forums, there's a lot more people there with Pas that will have done the job I'd think
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 08 May 2020, 08:14
by maxstu
slowcoach wrote:Have a look on thesamba forums, there's a lot more people there with Pas that will have done the job I'd think
Good idea.
Thanks
Stuart
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 09 May 2020, 08:15
by maxstu
Had a look on Samba. Boy, that site is difficult to navigate on my old phone! Kept freezing up.
Nothing found. Surely someone here has taken on this task?
Regards
Stuart
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 09 May 2020, 10:34
by pkrboo
maxstu wrote:Had a look on Samba. Boy, that site is difficult to navigate on my old phone! Kept freezing up.
Nothing found. Surely someone here has taken on this task?
Regards
Stuart
https://www.thesamba.com/vw/forum/viewt ... be83e3310d
Sent from my Pixel 4 using Tapatalk
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 09 May 2020, 11:27
by T3luestar
I changed the bushes on my PAS rack a long time ago, I remember it being tight, but not impossible to do without disconnecting anything.
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 09 May 2020, 11:39
by maxstu
pkrboo wrote:maxstu wrote:Had a look on Samba. Boy, that site is difficult to navigate on my old phone! Kept freezing up.
Nothing found. Surely someone here has taken on this task?
Regards
Stuart
https://www.thesamba.com/vw/forum/viewt ... be83e3310d
Sent from my Pixel 4 using Tapatalk
Aha! Prkboo thanks so much.
Regards
Stuart
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 06:59
by what2do
https://www.thesamba.com/vw/forum/viewt ... 428220fb9b" onclick="window.open(this.href);return false;
This may be the same link as above.
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 07:41
by maxstu
Yes and thank you. Theres an embedded link my phone would not open before.
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 08:20
by maxstu
Time for me to man up a bit
Looks a straight forward task.
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 09:39
by pkrboo
maxstu wrote:Time for me to man up a bit
Looks a straight forward task.
I reckon you just loosen all four bolts and do it. Maybe support the rack with some tie wraps so it doesn't stress the pipes.
Sent from my Pixel 4 using Tapatalk
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 09:51
by maxstu
On to it during the week

Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 10:56
by R0B
Watching with interest, as I intend doing this soon.
Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 11:03
by maxstu
R0B wrote:Watching with interest, as I intend doing this soon.
Cant you do your's first?

Re: Fitting Powerflex Bushes To PAS Rack
Posted: 10 May 2020, 14:54
by R0B
No, after you.
