Page 1 of 1
Alloy Wheels
Posted: 07 Dec 2005, 12:02
by cruiseyboy
Hi everyone, please help... I want to fit alloy wheels to my 1986 T25 but keep comiong a croper with 'Merc' wheels which I was assured would fit but don't. Any help or advice appreciated. Al
Posted: 07 Dec 2005, 14:09
by dubsta
Wheels
Posted: 08 Dec 2005, 09:04
by cruiseyboy
Cheers Dubsta
Posted: 08 Dec 2005, 12:21
by TechtroT25
Why did'nt the merc wheels fit?
Posted: 09 Dec 2005, 14:56
by cruiseyboy
They didn't fit because the front ones centre hole was too small and the rear ones wouldn't sit flat to the hub.
Posted: 09 Dec 2005, 16:23
by guz
centre hole will need opening up,
you need to remove the 2 11mm
bolts in the drum to sit flat.
bolt holes might need opening up too.
Posted: 10 Dec 2005, 16:18
by cruiseyboy
If I remove the 11mm bolts from the drum, can they be left out?
Posted: 10 Dec 2005, 16:49
by Simon Baxter
Yes.
Posted: 11 Dec 2005, 23:06
by cruiseyboy
Thanks Simon
Posted: 12 Dec 2005, 08:45
by cruiseyboy
Where would I get the holes increased for the front wheels? Would a standard garage be able to do this?
Posted: 12 Dec 2005, 10:38
by TechtroT25
Your local freindly engineering shop should be able to help
