Page 1 of 1
ABS connector.
Posted: 06 Apr 2020, 15:53
by maxstu
Do l disconnect ABS here (what a mess
) or the sensor at back of hub. I want to remove front suspension for a revamp.
Regards
Stuart
Re: ABS connector.
Posted: 08 Apr 2020, 06:42
by maxstu
maxstu wrote:Do l disconnect ABS here (what a mess
) or the sensor at back of hub. I want to remove front suspension for a revamp.
Regards
Stuart
No one? I going in alone then......
Re: ABS connector.
Posted: 08 Apr 2020, 06:55
by Cobra88
Hi Stu
I would be very gentle separating that plug as they are easy to break on vag models.
Dont disturb the sensor in the hub as i would expect it to be seized solid
If it works leave well alone mate.
Rick
Re: ABS connector.
Posted: 08 Apr 2020, 07:12
by maxstu
Hello Rick,
I hope you are well? And thanks for your support.
If l cant pull connector apart can l cut wire and make a new connection on rebuild? Or it doesnt work that way.
Parts for ABS are truly rare.
Regards
Stuart
Re: ABS connector.
Posted: 08 Apr 2020, 07:20
by Cobra88
you can join them but just go carefully and you should get it apart.
they only break if the connections are badly corroded inside which you cant see externally.
Rick
Re: ABS connector.
Posted: 08 Apr 2020, 07:45
by maxstu
Got it. Many thanks
Re: ABS connector.
Posted: 08 Apr 2020, 10:51
by maxstu
ABS Connector apart safely...and disc shield retains screws actually unscrewing....miracles
Note the appropriate screwdriver with socket end handle and ABS hood on plate.
Re: ABS connector.
Posted: 08 Apr 2020, 13:39
by slowcoach
Abs!? What kind of future technology is this!
Re: ABS connector.
Posted: 08 Apr 2020, 13:50
by maxstu
slowcoach wrote:Abs!? What kind of future technology is this!
Avoid at all costs. Nothing but a pain in the rear.
All parts obsolete, and never used in anger