Page 1 of 1

Crank Pulley Bolt Lubricant and Check out my Spade

Posted: 03 Apr 2020, 19:00
by The Hairy Camper
Just removed an old crank pulley bolt and installed a new crank seal.

As i was about to torque the CP bolt up to spec, i noticed the instructions said to oil the bolt. Since it's an important part, i thought i'd see what other people on here have used/recommend? I have 3in1 lithium grease, copper anti seize, moly grease, GT85, engine oil etc. Bentley said to use "oil" too.

Also, my 1Y didn't have a washer on the CP bolt. Bentley says it should have one.

Oh, and check out my Crank locking tool/spade :D

Image
Image

Cheers.