Club 80-90 Forums

Have been coving some new door cards, one of the ply sets available on eBay which are well cut with original hole positions for concealed clips
I got some 6mm soft foam spray glued that on first then glued the vinyl fabric on top of that , makes for a soft feel

Sent from my iPhone using Tapatalk

Itsblue wrote:


Sent from my iPhone using Tapatalk

Then glued the rear edge and went round with the staple gun , I was surprised how well they turned out ,
Not rushing and taking my time


Sent from my iPhone using Tapatalk

They look very tidy, nicely done around the curves and corners

Very plush, nice work

Before the clips are fitted offer up the covered door card to the door to check if it sits in to the shallow recess, if the material is thick the overall size of the card will causes problems . The original vw vinyl used on the doors is very thin compared to other materials. The door card needs to sit in the recess for the original style clips to work as they should.

yep its true , on the rear i didnt use any foam and just the thin vinyl with any attached fleecy stuff removed

got an ebay link to the cards please, I need some.

nice work, you have inspired me to do something about mine.

sorry for the delay

these are the ones i purchased ..

https://www.ebay.co.uk/itm/VW-T25-Trans ... SwYHxWOUU3" onclick="window.open(this.href);return false;

Itsblue wrote:sorry for the delay

these are the ones i purchased ..

https://www.ebay.co.uk/itm/VW-T25-Trans ... SwYHxWOUU3" onclick="window.open(this.href);return false;

Thanks

I saw those but Idon't want the set just the fronts

I have repaired mine now and will post up how I did it.

Forgive me if I'm being simple, but where are the holes for the handle, window roller ect? I'm considering doing mine and am not sure if the pre-cut ones holes will fit in the right places! as well as needing to cut speaker holes as well!

The holes are there in the door card I just haven’t cut them in the new covering fabric as yet