Club 80-90 Forums

Hi All,

I need a new plug that go onto the collant level sensor-my earth cable has broken off.

Does anyone know where I can get one from?

Thanks in advanced.

Try here

https://www.brickwerks.co.uk/catalogsea ... r+&x=0&y=0" onclick="window.open(this.href);return false;

Will be best quality

Just replace the terminal in the housing and a new length of cable if it is too short. No need for a new housing.

Does the plug come apart?

No. It is a terminal like this one, depress the two tabs with tool as shewn or fine screwdriver and push the terminal back out of the housing. There are two slots in the housing for access to the tabs like in 2nd pic.

Thanks for the info by Oldiebut goodie,

My plug looks slightly differant from your one but it come to bits the same. see link below.

https://www.brickwerks.co.uk/t3-parts/e ... r-kit.html" onclick="window.open(this.href);return false;

I have ordered new pin as my ones where in a poor state and they where 17p each.

Thanks again.