Club 80-90 Forums

Following my post below this was the response from the seller.

"Dear customer

The load rating and speed rating is: ZR and extra load
The dtm comes in a 73mm outer bore so you will require spiggot rings
with them to reduce to 66mm, these are also in stock.

Regards

Team UV"

Does anyone know what spiggot rings are?

Thanks

No you won't as the T25 does not have a load bearing center spigot anyway.. the standard wheels are a loose fit without bolts fitted, so you wont need them, cars have them to adapt the center bore of the wheel to the 'spigot' which is that bit that the wheel locates snugly on. You don't need 'em. Like saying you'd need spigot adaptors for BRM's on a 60's beetle

so the wheels should fit fine then?

is the load rating ok?

Unfortunatly, thats all I can tell you other than ZR is a speed not load rating.. you need at least 97 minimum load rating really. Or C rated but thats not gonna be low profile OR avaliable in your size.. Sorry I can't help more! But, yes, no spigot rings needed!