Club 80-90 Forums

Hi everyone,

Can anybody point me in the direction to anywhere on this forum or the web for the wiring diagram for this panel that is attached, i have looked on the wiki and the tech archives but can't seem to find anything, all i get is the Autosleeper panel and mc2000..much appreciated for any links for this..Thanks

That doesn't look like an MC2000

Is your van an AutoSleeper, if not what conversion is it ?

937carrera wrote:That doesn't look like an MC2000

Is your van an AutoSleeper, if not what conversion is it ?

yep i know its not a MC2000, the panel in the pic is what i have fitted now, i am after the wiring diagram for it, i have searched quite a few places and come up with zero, only those for the MC2000 panel.

My van is an Autosleeper 1985 model. Pic attached plus inside

I don't understand why i can't find anything on this panel what so ever, surely there should be some documentation on it apart from what to does..???

I've been looking around:

So, you probably know it's a Lab-Craft, and it was original equipment in the early AutoSleeper conversion. Later on they moved to the CP4 model, which was badged as an AutoSleeper unit, before finalising with the MC2000.

I have not been able to find out any more, beyond what is contained in the http://www.autosleeper.vwt25camper.info/index.html, but there is a user manual for the early models which at least tells you what each fuse is for.

I would use the relevant parts of the MC2000 stuff you have already found as a guide to what the wiring actually is

Do you have a specific problem ?

Yeah no worries, thanks for your help. Well the only reason i ask is that i have got and purchased a newer version fo the panel, the CP4 one, one that is labelled an autosleeper so would be next one on from the one i have and i am trying to get my head around the wiring that's all. guess i will have to go back to old skool ways and check each wire and label and transfer across to newer panel.

Thanks again though

Autosleeper did Talbots too and I have now found this https://talbotoc.com/talbot-autosleeper ... t4562.html

which links back to a wiring diagram for the DS220C in our wiki

All sorted today, and i have now updated the control panel to the DS220C, but not fitted the charger as i have solar panels that charge my leisure batteries so not needed, bit of a head scratcher to be fair and lots of undoing things to trace wires but got there in the end.


All points metered for correct voltages, and battery status light checked aswell.

Fantastic news, I can believe it's been a head scratcher, but now it's done it was so simple eh



Maybe you can wander over to this thread and help sort this one out - same Lab-Craft unit ?

https://club8090.co.uk/forum/viewtopic.php?f=40&t=168500

and thanks for posting back

No worries m8, i just posted on there not sure if it will help, i don't have a heater in my van