Page 1 of 1
Analogue clock not working in dash.
Posted: 03 Feb 2019, 20:56
by RustyRed
Hi,
Had a look in previous posts but cannot find anything which surprises me.
I need advice how to get the old clock ticking again. Is there a common fault I. E. Resister issue?
Any help is appreciated.
Re: Analogue clock not working in dash.
Posted: 03 Feb 2019, 22:22
by AngeloEvs
The clock is connected to the 12v supply and earth via the plastic membrane pcb. It could be a faulty connection at the clock or at the edge connector. The clock itself is a quartz crystal type and not really serviceable if the circuit fails.
Re: Analogue clock not working in dash.
Posted: 03 Feb 2019, 22:30
by Oldiebut goodie
Failed capacitors is the usual problem for them - do a search on Brickyard I am sure that it is still documented on there somewhere. Cheap and easy fix.
Re: Analogue clock not working in dash.
Posted: 13 Feb 2019, 14:05
by ukgoalie32
Re: Analogue clock not working in dash.
Posted: 13 Feb 2019, 17:12
by Oldiebut goodie
He has been back on here since but hasn't bothered to acknowledge anything - I am not helping any more.
