Page 1 of 1
AAZ vacuum hoses
Posted: 20 Dec 2018, 19:13
by davegeezzer008
Hi guys just finishing off installing my AAZ but I need some help please !
On the original feed pipe from the vacuum pump I’ve got a one way valve then two 3mm male tails where do these go ? Turbo ? the vacuum from the top of the LDA to go to the inlet manifold but there is another 3mm banjo on the bottom of the LDA ( rubber banjo) where does this go ?
Thanks in advance Dave
Re: AAZ vacuum hoses
Posted: 20 Dec 2018, 21:51
by Oldiebut goodie
EGR valve? Just thinking that my 1Y had one there.
Re: AAZ vacuum hoses
Posted: 20 Dec 2018, 23:00
by davegeezzer008
Oldiebut goodie wrote:EGR valve? Just thinking that my 1Y had one there.
Ahh yes that would account for one of them !! Think I’ve been a bit blinkered as to what I’ve got now as to what was there before lol. Thank you
Re: AAZ vacuum hoses
Posted: 20 Dec 2018, 23:32
by Oldiebut goodie
I opened the bonnet to look at the engine on my new van and quickly shut it! No way am I going to attempt to work on one of these modern engines, You can hardly get your hand down the side of the engine anywhere let alone identify which bits are what.
Good job I am keeping the old van so that I have something that I can work on and understand.
Re: AAZ vacuum hoses
Posted: 20 Dec 2018, 23:38
by davegeezzer008
Oldiebut goodie wrote:I opened the bonnet to look at the engine on my new van and quickly shut it! No way am I going to attempt to work on one of these modern engines, You can hardly get your hand down the side of the engine anywhere let alone identify which bits are what.
Good job I am keeping the old van so that I have something that I can work on and understand.
Totally agree ! Anything with a ECU forget it lol ! That’s why I thought AAZ instead of TDi