Club 80-90 Forums

Hi Guys,

I am hoping to get my AGG in over the next month and looking at how I can mount the header tank. My current setup does not have the bracket etc so wondered if anyone knows if it can be sourced and welded in?

Thanks

I was in the same predicament so I built one out off 20mm box section.

I thought as much, don't suppose you have any pictures of your finished product. My welding skills are very poor lol

I'll go and take some now.

Here's a link to one

https://photos.app.goo.gl/yHGm3aZVwY4VPusp7" onclick="window.open(this.href);return false;

Titus A Duxass wrote:Here's a link to one

https://photos.app.goo.gl/yHGm3aZVwY4VPusp7" onclick="window.open(this.href);return false;

Thanks for that, i might look into box section. What is the bottom part going to the top secured to, the engine mount?

The bracket is mounted on the side of the engine bay and secured with two M6 bolts.

Titus A Duxass wrote:The bracket is mounted on the side of the engine bay and secured with two M6 bolts.

It looks like it has a bit coming off underneath next to the PAS reservoir.

That's the arm / mount for the power steering reservior.