Club 80-90 Forums

Has anyone used these from Brickwerks to get around faulty dash lights?

https://www.brickwerks.co.uk/t3-parts/e ... epair.html" onclick="window.open(this.href);return false;

I've never bothered before but here it's picked up on the MOT now? Anyone else had issues with MOT recently and dash lights?

Cheers

Its probably just as easy to fit 12v LEDs for a fast solution - connected into lighting circuit or as I did, permanently on with ignition on. I've since upgraded to CJH's dash solution which takes the dash lighting into account.

Hi Just been reading this article i have checked fuses, all good. Removed dash pod both dash light bulbs look ok, the centre bulb " full beam one" is missing. Is this why the two others do not work, has there got to be a continuity between all three to make them illuminate. Also one of the dash bulbs circuit inside the blue strip is not continuous, is this a further problem. Thanks Tony

No, they'll work in parallel rather than series otherwise each bulb would need to be 4v if shared