Page 1 of 1
Pierburg one way valve
Posted: 06 Jul 2018, 09:26
by DoubleOSeven
My van stands for a while sometimes, few weeks. So to stop all the fuel returning to the fuel tank I have one of these to fit inline on the fuel feed into the carb. Just removes the need to crank the engine and work the fuel pump hard.
Q? Which way round does it go, does the arrow represent the direction of fuel flow for example. Should it not say IN if that was the case?
confused.com
Re: Pierburg one way valve
Posted: 06 Jul 2018, 09:44
by tobydog
An arrow on the housing shows the direction of flow.
https://www.ms-motorservice.com/en/tech ... ck-valves/" onclick="window.open(this.href);return false;
Re: Pierburg one way valve
Posted: 06 Jul 2018, 10:10
by captain Byrne
Can't you just suck/blow to see which way it should go?
Re: Pierburg one way valve
Posted: 13 Jul 2018, 18:43
by DoubleOSeven
Yes you can...thanks.
OUT meant flows out from tank.
Re: Pierburg one way valve
Posted: 13 Jul 2018, 19:26
by Sir Brixalot
Didn't know about these. Going to get one. As it's one way, does it matter where it's fitted in the supply?
Pierburg one way valve
Posted: 13 Jul 2018, 19:53
by DoubleOSeven
Good question. There’s only 0.5m of fuel pipe to play within the engine bay, so pretty much where I have it. Feed up from tank is the smaller diameter rigid pipe.
