Help with my water works please.....
Posted: 13 Apr 2018, 18:01
So I'm in the middle of swapping the 2 long water pipes that run down the bus.
I've discovered that they've been cut down in the past and "modified".
Cut a long story short, I'd like to check what connects to what.
Front of the bus, 2 connections on the rad. The lower one connects to plastic pipe running up the side of the rad, so I guess is actually the top hose. This hose has an elbow on it pointing upwards, if that helps.
The other hose connecting just above it goes straight onto the rad. I'm guessing this is actually the bottom hose.
Back of the bus, obviously 2 connections as well. First one is the top of the plastic thermostat housing. 2nd is onto a weird plastic distribution type thing.
So the question is, which hose on the rad should connect to which hose on the engine?
Thanks guys
I've discovered that they've been cut down in the past and "modified".
Cut a long story short, I'd like to check what connects to what.
Front of the bus, 2 connections on the rad. The lower one connects to plastic pipe running up the side of the rad, so I guess is actually the top hose. This hose has an elbow on it pointing upwards, if that helps.
The other hose connecting just above it goes straight onto the rad. I'm guessing this is actually the bottom hose.
Back of the bus, obviously 2 connections as well. First one is the top of the plastic thermostat housing. 2nd is onto a weird plastic distribution type thing.
So the question is, which hose on the rad should connect to which hose on the engine?
Thanks guys