Page 1 of 1
Hazard Warning lights not working
Posted: 23 Feb 2018, 14:51
by Jonnyb416
Hi All, can anyone suggest what I check next please?
I’ve changed the switch.
Checked the fuse. (I think, none of the metal strips are actually broken)
Indicators work as normal.
1982 diesel with an old style fuse box.
Any help appreciated.
Cheers, Jon.
Sent from my iPhone using Tapatalk
Re: Hazard Warning lights not working
Posted: 23 Feb 2018, 16:13
by ZsZ
here is a wiring diagram. Its for an Aircooled Us model, but the hazard is the same:
Re: Hazard Warning lights not working
Posted: 23 Feb 2018, 21:37
by bigherb
Chech the red/white cable to terminal 30 on the hazard switch is live.
Re: Hazard Warning lights not working
Posted: 26 Feb 2018, 08:52
by Jonnyb416
Found the issue. It was a fuse. They look ok but 1 was actually worn away.
Ordered a load off eBay.
Thanks everyone.
Sent from my iPhone using Tapatalk
Re: Hazard Warning lights not working
Posted: 26 Feb 2018, 11:05
by CovKid
Lol - just answered that in another thread. Bullet fuses can get fractures or damage without it being at all obvious unless removed and inspected carefully.
Re: Hazard Warning lights not working
Posted: 27 Feb 2018, 06:10
by Jonnyb416
Well I plane to clean up all the terminals and replace all the fuses. Think I’ve been very lucky this is the first fuse to go in nearly 8 years of ownership. They are sort of tarnished around the ends; kinda green.
Sent from my iPhone using Tapatalk