Club 80-90 Forums

One of the bulbs that illuminates the electric window switches on my T25 doesn`t work anymore. Is it possible to replace the bulb or is a new switch required. Thanks for any assistance.

Depends on you, and the switch. If it was fitted with a bulb, it should be replaceable. Would need to see photo of back of switch but if it were me I'd replace it with an LED and resistor.

No separate bulb listed in the parts diagrams so presumably integral with the switch.

Thanks for the replies. A replacement switch it is then. Thankfully they are available from Brickwerks, not OEM but close enough and not too expensive.