Club 80-90 Forums

I know that in the past I have seen a drawing of the dimensions for fitting the side plank brackets but I cannot find it in the wiki.
If somebody has a link I would be very grateful.

Bentley manual has drawings and measurements for the body kit side planks, i have a body kit to fit for a customer, its a double slide door van so using half a lhd original vw kit and the other half No more rusty bits reproduction which is quality workmanship. They also give you a photocopy of the bracket fitting page from the original drawings.

Thanks multisi .
I have a twin slider, I made the other side by cutting a standard offside and with a fair bit of fiberglass work remanufactured to match the nearside.
Not too difficult but very time consuming.

My Bentley manual download does not have it in.
Any chance you cans can it and put it on here.

With much searching on the web it can be found here
http://www.westfaliat3.info/html/westfa ... loads.html" onclick="window.open(this.href);return false;
Many thanks though

nicq wrote:My Bentley manual download does not have it in.
Any chance you cans can it and put it on here.

Section 66 in the download version. ( and paper)

Oldiebut goodie wrote:

nicq wrote:My Bentley manual download does not have it in.
Any chance you cans can it and put it on here.

Section 66 in the download version. ( and paper)

That would account for it , my download only goes up to section 46.
Anybody got a download link please.

Yes.