Club 80-90 Forums

I had a problem selecting gears. Reverse etc. Bought the parts I thought I needed from brickwerks. Started swapping it all over from the front. Nothing seemed too bad except the stop plate which had broken one of the "blades" off. Well I sourced one and started to undo the rear shift rod from the UJ and discovered the rear rod has snapped next to the T piece socket. This looks like it has been repaired before but obviously not that well. Well I've found my problem. But where could I get a new rear shift rod?

call Mick
http://www.nwvw.co.uk/" onclick="window.open(this.href);return false;

Or these people
Wagonbuild - main site:

http://www.wagonbuild.com" onclick="window.open(this.href);return false;

Make sure you get the right one. I think rear end alters on Air cooled, Diesel and Syncro etc. Not 100% sure on differences, but there are some and not sure what van you have....
Give them a bell, the chap is really helpful.

Pop your van type / engine type in your description too Rob, it makes it far easier to answer your queries mate

E D I T: this link takes you to a page with a petrol one on for £45... Make sure it is the petrol one you need first though.!!

http://www.ekmpowershop16.com/ekmps/sho ... s-62-c.asp" onclick="window.open(this.href);return false;

Cheers guys. Tried calling as they are only up the road. No answer. I have a jx engined syncro. Don't know if all the parts are the right ones tho.

Robjackson wrote:Cheers guys. Tried calling as they are only up the road. No answer. I have a jx engined syncro. Don't know if all the parts are the right ones tho.

Hmmm.

The rear rod is definitely the same for WBX petrol 4 and 5 speeds, but I am quietly confident that diesel are different, and prob Syncro too.
I will let someone else confirm 100% on that - or let you speak to the people on the links and ask.

Put a wanted add on here in the `wanted` section though. You never know...

Rob
you need syncro diesel specific rear linkage, Mick is hard to get hold of some of the time you just have to keep trying, I find 10am weekdays he's fairly available.
I don't have a spare diesel syncro linkage shaft here I'm afraid