Page 1 of 1
SA T3
Posted: 18 Nov 2016, 23:15
by george2490
Evening,
can anyone tell me if SA T3(early) bodywork differed from EU T3 (early) in dimensions.
Looking for body cut and SA looks like best available.
Cheers,
George
Re: SA T3
Posted: 19 Nov 2016, 15:29
by Aidan
Russel 4x4bus is the only person this side of the pond who will know for sure pm him
Re: SA T3
Posted: 19 Nov 2016, 18:18
by george2490
Thanks Aidan. Will do
Re: SA T3
Posted: 21 Nov 2016, 17:40
by multisi
Did you get an answer ? looking at 7zap, it says SA vans start in 1995, which could mean the pre 95 SA vans were german spec.
Re: SA T3
Posted: 21 Nov 2016, 18:07
by marlinowner
They went big window etc before 1995, mine is a big window 1993.
Re: SA T3
Posted: 21 Nov 2016, 18:54
by george2490
I did, appears that cut won't work. Matters not I may have a solution in the pipeline!
Re: SA T3
Posted: 22 Nov 2016, 09:49
by multisi
So what was the answer ?
Re: SA T3
Posted: 22 Nov 2016, 10:24
by george2490
That the cut from SA bus won't fit my early panel conversion.
Re: SA T3
Posted: 22 Nov 2016, 17:07
by multisi
What body parts are you after .
Re: SA T3
Posted: 22 Nov 2016, 17:48
by george2490
Was looking for a body cut for early right hand drive panel conversion, covering the rear nearside gutter to below slider rail and c to d post.
HiI think I have it covered now as mm has given me some advice.
The biggest problem was finding the part and a seller willing to courier to Glasgow.