Page 1 of 1
Westy LPG tank refurb
Posted: 19 Sep 2016, 21:15
by rockthebus
Hi Chaps
So I've got a 1990 Westy, with an underlung LPG tank, which is now empty, and looking to remove and refurb.
What are my options?
Any legislation that I must adhere to?
Any feedback appreciated, and thanks!
Re: Westy LPG tank refurb
Posted: 19 Sep 2016, 22:03
by Westy End
there are a few threads on this.
try this one:
https://club8090.co.uk/forum/viewtopic.p ... hilit=tank" onclick="window.open(this.href);return false;

Re: Westy LPG tank refurb
Posted: 19 Sep 2016, 22:25
by rockthebus
Brilliant. In future I should try alternative searches to "LPG" tank!
Much appreciated

Re: Westy LPG tank refurb
Posted: 20 Sep 2016, 07:37
by Westy End
no problem. let us know how you get on. I plan to tackle the underside of the van soon so this refurb will be on my list.
happy tinkering.
Re: Westy LPG tank refurb
Posted: 07 Oct 2016, 18:58
by rockthebus
**Quick update**
So tank has been stripped of all valves and pipework. One stud sheared on the level sensor boss, and one one the sensor to sensor boss.
Tank now taken to media blasters, who found a weak spot which blasted through. This is now off to be welded and then pressure tested before being powder coated.
Question: What pressure should the tank be tested to? What's the usual operating pressure within the cylinder?
Then I need to buy a new gauge and sender, and find someone to make me up a new steel pipe which runs from the tank to the bulkhead type fitting under my bus. Anyone know if its available anywhere? Tried BW but not listed on their site...
Will update as soon as I have further info
Re: Westy LPG tank refurb
Posted: 24 Oct 2016, 17:01
by rockthebus
So bad news...
The cylinder is too thin for the welder to be happy that it will be a long standing repair.
I know that Tinley Tech and Gasure supply kits.
Has anyone fitted one to a LHD Westy? What additional parts need to be sorted? Was it a straight forward fit?
Thanks
Re: Westy LPG tank refurb
Posted: 27 Oct 2016, 15:38
by kevtherev
Sorry to hear that.
I can recommend gasure kits, they are very easily fitted.
Re: Westy LPG tank refurb
Posted: 31 Oct 2016, 22:22
by rockthebus
I'm now tempted to save for an LPG conversion and see if I can get a vapour take of for the hob...
Re: Westy LPG tank refurb
Posted: 01 Nov 2016, 11:22
by R0B
You need separate tanks for the cooker and the engine.
Re: Westy LPG tank refurb
Posted: 01 Nov 2016, 11:58
by rockthebus
Really? Is that a requirement of law?
Sent from my SM-G930F using Tapatalk
Re: Westy LPG tank refurb
Posted: 01 Nov 2016, 12:41
by R0B
Not sure about the law.But I remember Steve at Gasure telling me it was not possible.
Re: Westy LPG tank refurb
Posted: 01 Nov 2016, 23:54
by ajsimmo
It's not possible.