Club 80-90 Forums

Hi,
This summer our Fiamma (T45) awning took some stick particularly while in Italy; when away from the van a horrendous storm filled the extended awning and twisted an already not particularly straight backplate.
I am considering taking down and taking apart the awning with the idea of trying to straighten the main aluminuim extruded backplate.
Has anyone attempted this and any advice will be appreciated.
Worst case scenario is to replace this backplate with new, depending on the cost.
Regards
Graham

Hi, it is possible to straighten a slight bend in the back plate, I have done it in the past but aluminium is a pig to work with as once bent it tends to crack when you try to straighten it. It is definitely worth a try but it may be beyond help. Fiamma parts are horrendously expensive so maybe have a look on ebay for an awning being sold for spares as quite often it is the legs or the fabric that give up and insurance companies just say 'fit a new awning'. The back plate is just a plain extrusion so if you find one that is too long it can be cut down to suit if that helps.

Hope this helps.

Thanks Cassandra,
I"ll have a look this winter; the twist is only slight, but may be the reason why the awaning has a significant rattle now.
Regards
Graham