Page 1 of 1
Door card dimensions for laser cut
Posted: 28 Aug 2016, 03:02
by CamMoore
I am looking at making some new door cards and was thinking about getting them laser cut for a nice finish. Does anyone have the dimensions of the door card? I assume the pre cut ones you can buy are laser cut or stamped out so I'm sure they would exist somewhere.
Re: Door card dimensions for laser cut
Posted: 28 Aug 2016, 10:38
by Plasticman
dont think you would be smart cutting from dimensions as they are not square so to speak , ,just buy a pair or borrow and have cut but cost prob the same either way
mm
Re: Door card dimensions for laser cut
Posted: 28 Aug 2016, 20:35
by Dazco
Thin ply and a sharp Stanley knife blade , cheep and simple.
Re: Door card dimensions for laser cut
Posted: 28 Aug 2016, 21:44
by DoubleOSeven
How does your time and effort and some cost compare against buying them for ~£30. Just a thought?
http://www.justkampers.com/vw-t25-parts ... -trim.html" onclick="window.open(this.href);return false;
Sent from my iPhone using Tapatalk
Re: Door card dimensions for laser cut
Posted: 29 Aug 2016, 05:22
by CamMoore
I live in Australia so they are a bit harder to buy. I've also got free access to a laser cutter and possibly material.
But I guess I'll have to do it the old fashioned way!
Sent from my iPhone using Tapatalk
Re: Door card dimensions for laser cut
Posted: 29 Aug 2016, 09:21
by DoubleOSeven
Oh I see. This guy's experience may help then...
https://t25camper.wordpress.com" onclick="window.open(this.href);return false;
Sent from my iPhone using Tapatalk