Club 80-90 Forums

E D I T they are sold by BW just not easy to find on the mobile webshop




Brickwerks used to sell a stainkess copy of a standard exhaust, parts were largely interchangeable with the standard steel sections
These are not sold by BW anymore, I think theg had them made, anybody see them elsewhere?

I have a 2&4 pipe thats cracked beyond repair.

thanks

just for information .. .. same problems here. cracked up by the manifold after the welded on flange ??

could try JP EXHAUSTS

Not sure if it is a BW one, but never seen anybody else selling these.
Both 2&4 and 1&3 are split with joins that need U bolts
This is no criticism of BW, Stainless exhausts crack if not installed properly.
All bolts needs to be assembled loose and slowly tightened in stages to prevent stress on any one weld.

Looks like this one has been welded before.
Deffo all stainless just not cleaned up yet.

everything else is in great condition

PS how do you remove heat marks?

dumbo wrote:could try JP EXHAUSTS

Thanks will do.

As far as I am aware only the BW one was the same as the original.The JP one is not.

Those are some terrible looking welds!

I hope the welders guide dog didn't get arc eye.

itchyfeet wrote:Brickwerks used to sell a stainkess copy of a standard exhaust, parts were largely interchangeable with the standard steel sections
These are not sold by BW anymore, I think theg had them made, anybody see them elsewhere?

I have a 2&4 pipe thats cracked beyond repair.

thanks

You sure they are not sold by Brickwerks anymore
https://www.brickwerks.co.uk/t3-parts/t ... nless.html" onclick="window.open(this.href);return false;
https://www.brickwerks.co.uk/manifold-p ... nless.html" onclick="window.open(this.href);return false;

Brilliant thanks
I just looked on the menus and under exhausts is just the standard budget ones, so assumed.

yep search on stainlees and it's there

https://www.brickwerks.co.uk/manifold-p ... nless.html" onclick="window.open(this.href);return false;

How they hope to sell them when they are not on the menu I don't know.

Follow Brickwerks drop downs as follows

T3 Engine
T3 Petrol
T3 Exhausts

They really, really are poor welds but I think its serviceable, tig stainless filler rod bit of flat wheeling, could even tig weld a plate on top to strengthen.

NicBeeee wrote:Follow Brickwerks drop downs as follows

T3 Engine
T3 Petrol
T3 Exhausts

They really, really are poor welds but I think its serviceable, tig stainless filler rod bit of flat wheeling, could even tig weld a plate on top to strengthen.

on a tablet you only get budget exhaust parts, you see the lot on a pc but I didn't know that.
https://club8090.co.uk/forum/viewtopic.p ... 5#p8150008" onclick="window.open(this.href);return false;

nah I think it's going to break again so going to buy new.

I didn't weld it