Page 1 of 1
oil
Posted: 03 Jul 2016, 14:30
by dumbo
hi a friend of mine done a oil change and now has a leak on a push rod tube and he said there was no leaks before? i said to him how much oil did you put in? its just over the top line so he said its the same as last time ?? to much oil/pressure you blew the seal am i right or not ??
simon
Re: oil
Posted: 03 Jul 2016, 14:34
by itchyfeet
no, pushrods are in sump oil so nothing to do with oil pressure but if the seal was bad anyway then over filing means it leaks past the seal, top level on didstick is just by the lower pushrod oil seals.
Re: oil
Posted: 03 Jul 2016, 14:45
by NicBeeee
perhaps also check what type of oil hes used, before and after
Re: oil
Posted: 03 Jul 2016, 14:53
by dumbo
ah ok thanks for that
simon
Re: oil
Posted: 03 Jul 2016, 16:07
by itchyfeet
Been meaning to check the exact level of the dipstick for a while
looks like top mark is above the lower edge of the tappets / push rod tube.

Re: oil
Posted: 03 Jul 2016, 18:16
by dumbo
cheers itcty thats a good picture to show him

cheers mate