Club 80-90 Forums

This is a last minute plea,

I am going to fit my eberspacher (B1L) today, but really cant decide where to put it, no-where seems obvious.

Under the rock'n'roll seat is out as it is all wood and I am concerned about the heat and wood combination.

My current plan is to see if I can mount it in the hole where the ducted air comes in just in front of the gearstick. Otherwise, maybe under the cooker behind the drivers seat?

Any suggestions, or just telling me where yours is at the moment would be a great help.

It's cold in the van

i dont have one myself, but i have seen a few under the bench seat...

Stick it under your bench seat i would not worry about it they are quite safe

Thanks for the suggestions

My only concern is that I will need to cut the bench seat about and mount the eberpatcher through the wood. It's also surrounded by wood??
Surley with the heat this would be a bit dangerous??

My bench seat has the rock'n'roll bed on it. I guess I will lose half of the space under the seat, was also thinking of putting the leisure battery under there as it's too big for under the passenger seat.

Any other options?

mine is located under glovebox by passenger seat and heats van up in the back no problem

Heard a few peeps on here have them under the glove box, good compromise as you dont lose space elswhere , my propex is under the rr bed and ihave to empty out all the crap when I run it, but how often do you use it?

thanks,

Can anyone post a pic of their eber under the glovebox?
Or email me one. it would be a real help to locate.

martynbuckley(at)gmail.com

cheers,
Martyn

unfortunately I only have use of lap top at moment but i have definately posted a pic of it on here at some point...will have a look

mine fitted under the g/box on me orange general

Got mine under the rock and roll. The only stuff i keep next to it are tools and bits that don't matter if they get hot. Controls are right where i need them too.

Ebers rock!

Ringo

thanks gang,

It took me a while to work out the pic, but I see you have it mounted on its side with the intake and exhuast pointing forward !
Didn't thiink of that, now it makes sense..

Going to have a bash tomorrow now.

Bags of help, thanks guys