Club 80-90 Forums

I have a creaking noise from my offside rear wheel it sounds like it is going creak creak creak as the wheel turns and as I take a right hand bend it eases off and increases when I go round a left hand bend.I nipped into work today to do an oil change and put the van on the hoist and everything seems to be tight,no split gaiters and is silent when I turn the wheel,my father in law thinks that the gaiters may need repacking with grease but he has not heard the noise yet,any ideas what it may be?,it is getting louder

Check that the round spring plates (upon which the spring sits) is secure, noting the condition of the location peg in the middle of it. What usually happens is the bottom of the spring starts wearing away at it until it gradually works its way through. They will creak big time. Also look at condition of shock absorber mounts. And yes, theres a chance it hasn't been picked up on an MOT. I actually pointed it out to my tester explaining what I was going to do to put it right and he was quite happy with that. Took it back the following week to show him.

Much easier to inspect fully with wheel off.

thanks will have a look at it,would be surprised as everything looks pretty solid but you never know

Are all the wheel nuts tight?

Also might be the trailing arm bushes, spray with silicone lube

yep,the wheel nuts were loose they have never done that before but my stepdaughter was telling me that a couple of her mates have had their wheel nuts undone and one actually had a wheel fall off,also was missing a wheel nut,wonder if someone has been playing silly buggers

Always a good idea to check your nuts on a regular basis.