Page 1 of 1
Drop link measurements ?
Posted: 02 May 2016, 18:32
by doenut82
Does anybody know what part of the anti-roll bar drop link top Bush you need to measure to find out what size you need ?
Sent from my SM-G925F using Tapatalk
Re: Drop link measurements ?
Posted: 02 May 2016, 18:40
by 123-jn
Its the diameter of the roll bar its self you need to measure. Give it a brush off and clean up next to the bush and measure with a vernier. You can measure it anywhere but it is perhaps easier there. There are a number of different diameters, all within a mm or two of each other.
Re: Drop link measurements ?
Posted: 02 May 2016, 19:03
by doenut82
I thought so, just checked and its a 21mm. can order the right one now .
