Page 1 of 1

Running on two

Posted: 14 Jan 2007, 23:12
by seakay
Anyone any idea why my van occasionally loses two cylinders? It can run all day then stop - after 10 minutes and 50 turns of the key it will run fine again. In the morning sometimes it will start sometimes it won't. Have changed plugs, leads, cap and rotar arm, spark is fine so it looks like either injection or management problem. Can't risk driving it until fixed so all help appreciated!! It's a 2.1.

Posted: 14 Jan 2007, 23:26
by Fritz
Best bit of advice I can give you is to purchase a Bentley Manual for your model as there are some detailed explanations of how to carry out an engine bay wiring check.

Regards,

Fritz,,,,,

PS, have you tried changing the fuel filter recently ?

Posted: 15 Jan 2007, 01:33
by Andy syncro-nutz
Sound like a bad connection on the two 2pin block connectors in the Inj harness! Mmmmybeee!!