Club 80-90 Forums

I'm replacing the manual valve that allows water to flow though heater matrix for a 12v solenoid-powered one. Can anyone verify the internal diameter of the hose where the manual valve is located or measure an old valve for reference? Is it 5/8" or equivalent in metric?

I know that I used 15mm copper pipe to seal up the rear heater hose temporarily under the rear seat. So 5/8 sounds right to me.

Its 15mm- 5/8ths

15mm = 0.590"
5/8" or 0.625" = 15.88mm

Which is it?



Sent from my Atari 7800

16mm
Germans didn't use imperial afaik on these vans.
https://www.brickwerks.co.uk/heater-fee ... icone.html" onclick="window.open(this.href);return false;

Thanks all. I know what I'm looking for now.