Club 80-90 Forums

Spot my schoolboy error:



I've written a blog post on replacing the parts: https://siradventure.wordpress.com/2016 ... rbishment/

Bracket bolted onto wrong side?

Diesel/petrol cup error?

Lever on shaft not vertical!

It's the bloody flange! I bolted one to the wrong side of the bracket.

I had to undo everything.

Nice to see bellows. Incidentally you can use a corrugated oil filler (cut up) from Wilco. Guess how I know

CovKid wrote:Nice to see bellows. Incidentally you can use a corrugated oil filler (cut up) from Wilco. Guess how I know

It's an inspired replacement! I saw these mini sauce bottles in Wilko and thought they might work:

jamesakers wrote:It's the bloody flange! I bolted one to the wrong side of the bracket.

I had to undo everything.

So obvious I couldn't see it.

Not convinced on the sauce bottles...

jamesakers wrote:Spot my schoolboy error:



I've written a blog post on replacing the parts: https://siradventure.wordpress.com/2016 ... rbishment/

Very helpful thread - should be followed by anyone whose gear change is rough. Nicely put together as well. Just remember to make sure that you are doing it right for your particular T25...

Not all vans have the bellows. My 84 doesn't.