Club 80-90 Forums

As it says.....fitting dells and bought a filter King to regulate the pressure.

Thanks

Paul

I mounted mine in the dustbin, many years ago.......

Just to save me sifting through loads of Google results, what is it?

ghost123uk wrote:Just to save me sifting through loads of Google results, what is it?

Haha sorry mate, it's a fuel filter and regulator in one so I can set the fuel pressure for the dells

https://www.vwheritage.com/shop/AC12720 ... mm-unions/" onclick="window.open(this.href);return false;

Have a chat with Ian Bailey at Burton Performance (0208-554-2281) as he should be able to advise:

http://www.burtonpower.com" onclick="window.open(this.href);return false;

It will need to go after the fuel pump so where I your pump mounted?
Is it the glass bowl version or metal? If it the glass bowl it's not a good idea to put it under the van.
Remember the gauge is for setting up only and a bit of ptfe tape on the port plug will help seal it when your done.
Look at where there is space to mount it then decide if there is a good path for you fuel lines to and from it, if not pick somewhere else.

It's the metal version. A lot of guys with bays put them in the engine bay.....what do you think?

My pump is just after the tank outlet

Don't see a problem with mounting in the engine bay, it's where I have mounted them in the past on other cars I have fitted them to.

Great.....because that'll be the easiest place by far! Was just worried a bit due to the temp in there

Don't worry it not cheap plastic that's likely to melt when I gets warm.